Optimal redesign of groundwater quality monitoring networks: a case study

Assessment and redesign of water quality monitoring networks is an important task in water quality management. This paper presents a new methodology for optimal redesign of groundwater quality monitoring networks. The measure of transinformation in discrete entropy theory and the transinformation–distance (T–D) curves are used to quantify the efficiency of sampling locations and sampling frequencies in a monitoring network. The existing uncertainties in the T–D curves are taken in to account using the fuzzy set theory. The C-means clustering method is also used to classify the study area to some homogenous zones. The fuzzy T–D curve of the zones is then used in a multi-objective hybrid genetic algorithm-based optimization model. The proposed methodology is utilized for optimal redesign of monitoring network of the Tehran aquifer in the Tehran metropolitan area, Iran.     

Heavy metal contamination from mining sites in South Morocco: Monitoring metal content and toxicity of soil runoff and groundwater

The aim of the present work is the assessment of metal toxicity in runoff, in their contaminated soils and in the groundwater sampled from two mining areas in the region of Marrakech using a microbial bioassay MetPLATE™. This bioassay is based on the specific inhibition of the β-galactosidase enzyme of a mutant strain of Escherichia coli, by the metallic pollutants. The stream waters from all sampling stations in the two mines were all very toxic and displayed percent enzyme inhibition exceeding 87% except SWA₄ and SWB₁ stations in mine C. Their high concentrations of copper (Cu) and zinc (Zn) confirm the acute toxicity shown by MetPLATE. The pH of stream waters from mine B and C varied between 2.1 and 6.2 and was probably responsible for metal mobilization, suggesting a problem of acid mine drainage in these mining areas. The bioassay MetPLATE™ was also applied to mine tailings and to soils contaminated by the acidic waters. The results show that the high toxicity of these soils and tailings was mainly due to the relatively concentration of soluble Zn and Cu. The use of MetPLATE™ in groundwater toxicity testing shows that, most of the samples exhibited low metal toxicity (2.7–45.5% inhibition) except GW3 of the mine B (95.3% inhibition during the wet season and 82.9% inhibition during the dry season). This high toxicity is attributed to the higher than usual concentrations of Cu (189 μg Cu l⁻¹) and Zn (1505 μg Zn l⁻¹). These results show the potential risk of the contamination of different ecosystems situated to the vicinity of these two metalliferous sites. The general trend observed was an increase in metal toxicity measured by the MetPLATE with increasing total and mobile metal concentrations in the studied matrices. Therefore, the MetPLATE bioassay is a reliable and fast bioassay to estimate the metals toxicity in the aquatic and solids samples.     

Genotoxicity assessment of acute exposure of chlorpyrifos to freshwater fish Channa punctatus (Bloch) using micronucleus assay and alkaline single-cell gel electrophoresis

Chlorpyrifos (O,O-diethyl O-3,5,6-trichloro-2-pyridylphosphorothioate) is one of the organophosphate pesticides widely used in agricultural practices throughout world and irreversible inhibitor of cholinesterase in all animal species. Limited efforts have been made to study acute genotoxic effects of chlorpyrifos (CPF) in different tissues of fish using genotoxic biomarkers. Therefore, the present investigation was aimed to study the induction of DNA damage by CPF in freshwater teleost fish Channapunctatus using micronucleus assay (MN assay) and alkaline single-cell gel electrophoresis (comet assay). The value of LC(50) - 96 h of CPF was determined as 811.98 microgl(-1) for C. punctatus, in a semi-static system and on the basis of LC(50) value three acute concentrations viz., 203, 406 and 609 microgl(-1) were determined. The fishes were exposed to the different concentrations of CPF for 96 h and samplings were done at regular intervals for assessment of the MN frequencies and DNA damage. In general, significant effects (P<0.01) from both concentrations and time of exposure were observed in exposed fishes. It was found that the micronucleus induction was highest on 96 h at all concentrations in the peripheral blood. Similar trend was observed for the DNA damage measured in terms of the percentage of tail DNA in the lymphocyte and gill cells. This study explored the combined use of micronucleus assay and comet assay for in vivo laboratory studies using fresh water fish for screening the genotoxic potential of xenobiotics.     

28-homobrassinolide protects chickpea (Cicer arietinum) from cadmium toxicity by stimulating antioxidants

In the present experiment the seeds of Cicer arietinum (L.) cv. Uday were inoculated with specific Rhizobium grown in sandy loam soil and were allowed to grow for 15 days. At this stage, the seedlings were supplied with 0, 50, 100 or 150 microM of cadmium in the form of cadmium chloride and sprayed with 0.01 microM of 28-homobrassinolide (HBL) at 30-day stage. The data indicated that plant fresh and dry mass, number of nodules, their fresh and dry mass, leghemoglobin content, nitrogen and carbohydrate content in the nodules, leaf chlorophyll content, nitrate reductase and carbonic anhydrase activities decreased proportionately with the increasing concentrations of cadmium but the content of proline and the activities of catalase, peroxidase and superoxide dismutase increased. The ill effect, generated by cadmium, was overcome if the stressed plants were sprayed with HBL.     

A mathematical model to predict the composition and generation of hospital wastes in Iran

The aim of this study is to investigate the quality and quantity of hospital wastes in Iran. The generated hospital wastes have been estimated by the number of hospitals and the number of active beds in each province of Iran in 2001. All data and information have been gathered from: (i) Iran Statistics Center, (ii) literature review, and (iii) hospital waste investigations for an average hospital. Physical analyses have been conducted in terms of various materials (plastic, textile, paper, metal, and others) and components (biological, infectious, medical, and regular wastes). Based on the above-mentioned investigation and information, a mathematical model has been developed to calculate the generation of (infectious) hospital wastes for any desired year. Utilizing the model, generated infectious hospital wastes has been estimated as 698,937 tones for 2008 (short-term) and 3,494,387 tones for 2028 (long-term period). If the real infectious wastes are collected separately, then the generated infectious wastes will be reduced by 15.1% of the above-mentioned amount (139,787 tones for 2008, and 698,877 tones for 2028). Results of physical analysis show the components of the hospital waste as: (a) infectious, 67.3%; (b) medical, 8.8%; (c) biological, 1.8%; and (d) common municipal wastes, 22.1%. An appropriate collection method requires training the staff at hospitals along with preparation of the required facilities. Of course, both of these requirements are cost intensive.     

The CO2 abatement cost curve for the Thailand cement industry

The cement industry is one of the largest carbon dioxide (CO₂) emitters in the Thai industry. The cement sector accounted for about 20,633 kilotonnes (ktonnes) CO₂ emissions in 2005 in Thailand. A bottom-up CO₂ abatement cost curve (ACC) is constructed in this study for the Thai cement industry to determine the potentials and costs of CO₂ abatement, taking into account the costs and CO₂ abatement of different technologies. The period of 2010–2025 is chosen as the scenario period. We analyzed 41 CO₂ abatement technologies and measures for the cement industry. Using the bottom-up CO₂ ACC model, the cost-effective annual CO₂ abatement potential for the Thai cement industry during the 15 year scenario period (2010–2025) is equal to 3095 ktonnes CO₂/year. This is about 15% of the Thai cement industry’s total CO₂ emissions in 2005. The total technical annual CO₂ abatement potential is 3143 ktonnes CO₂/year, which is about 15.2% of the Thai cement industry’s total CO₂ emissions in 2005. We also conducted a sensitivity analysis for the discount rate parameter.     

A simplified model for reservoir operation considering the water quality issues: Application of the Young conflict resolution theory

In this study, an algorithm combining a multi-objective genetic algorithm (GA)-based optimization model and a water quality simulation model is developed for determining a trade-off curve between objectives related to the allocated water quantity and quality. To reduce the run-time of the GA-based optimization model, the main problem is decomposed to long-term and annual optimization models. The reliability of water supply is considered to be the objective function in the long-term stochastic optimization model, but the objective functions of the annual models are related to both the allocated water quantity and quality. The operating policies obtained using this long-term model provide the time series of the optimum reservoir water storages at the beginning and the end of each water year. In the next step, these optimal reservoir storage values are considered as constraints for water storage in the annual reservoir operation optimization models. The epsilon-constraint method is then used to develop a trade-off curve between the reliability of water supply and the average allocated water quality. The Young conflict resolution theory, which incorporates the existing conflicts among decision-makers and stakeholders, is used for selecting the best solution on the trade-off curve. The monthly reservoir operating rules are then calculated using an Adaptive Neuro-Fuzzy Inference System, which is trained using the optimal operating policies. The proposed model is applied to the 15-Khordad Reservoir in the central part of Iran. The results show that this simplified procedure does not reduce the accuracy of the reservoir operating policies and it can effectively reduce the computational burden of the previously developed models.     

A two-generational reproductive toxicity study of zinc in rats

A two-generation reproductive toxicity study of zinc chloride (ZnCl(2)) was conducted in rats. F(o) male and female rats were administered 0.00 (control), 7.50 (low), 15.00 (mid) and 30.00 (high) mg/kg/day of ZnCl(2). Selected F(1) male and female rats were exposed to the same doses received by their parents (F(o)). Exposure of F(0) parental rats to ZnCl(2) showed significant reduction in fertility, viability (days 0 and 4), and the body weight of F(1) pups from the high-dose group but caused no effects on litter size, weaning index, and sex ratio. Similarly, the continued exposure of F(1) parental rats to ZnCl(2) also reduced fertility, liter size, viability (day 0), and the body weight of F(2) pups within the high-dose group but caused no effects on weaning index and sex ratio. Exposure of ZnCl(2) to F(0) and F(1) parental males resulted in a significant reduction in their body weights, and the F(0) and F(1) parental females did not show any significant difference in their body weights compared to their control groups. However, the postpartum dam weights of both F(0) and F(1) female rats were significantly reduced compared to their controls. Exposure of ZnCl(2) to F(o) and F(1) generation parental rats did not produce any significant change of their clinical signs as well as their clinical pathology parameters, except the alkaline phosphotase (ALK) level, which showed an upward trend in both sexes of both generations. Exposure of ZnCl(2) to F(0) rats resulted in a reduction of brain, liver, kidney, spleen and seminal vesicles weights of males and in the spleen and uterus of females. Similarly, exposure of F(1) rats to ZnCl(2) also resulted in reduction of brain, liver, kidney, adrenal, spleen, prostate and seminal vesicles weights of males and in spleen and uterus of females. ZnCl(2) exposure resulted in grossly observed gastro-intestianla (GI) tract, lymphoreticular/hematopoietic, and reproductive tract lesions in parental rats in both generations. Reduced body fat was also recorded in F(1) parental rats.     

AHP based life cycle sustainability assessment (LCSA) framework: a case study of six storey wood frame and concrete frame buildings in Vancouver

Construction and building industry is in dire need for developing sustainability assessment frameworks that can evaluate and integrate related environmental and socioeconomic impacts. This paper discusses an analytic hierarchy process (AHP) based sustainability evaluation framework for mid-rise residential buildings based on a broad range of environmental and socioeconomic criteria. A cradle to grave life cycle assessment technique was applied to identify, classify, and assess triple bottom line (TBL) sustainability performance indicators of buildings. Then, the AHP was applied to aggregate the impacts into a unified sustainability index. The framework is demonstrated through a case study to investigate two six storey structural systems (i.e. concrete and wood) in Vancouver, Canada. The results of this paper show that the environmental performance of a building in Canada, even in regions with milder weather such as Vancouver, is highly dependent on service life energy, rather than structural materials.